Ubuntu 网卡信息2

mac2022-06-30  84

【整理】Ubuntu/Linux下如何查看无线网卡的具体型号

【整理】Ubuntu/Linux下如何查看无线网卡的具体型号

【目的】

为了重新安装正确的无线网卡的驱动,所以要先弄清楚我的笔记本上的无线网卡的具体的型号。

 

【过程】

打开终端,用如下命令/方法查看:

1。 ifconfig -a

ifconfig

去试了,是否后面加参数-a,输出都是一样的:

crifan@crifan-laptop:/usr/bin$ ifconfig -aeth0      Link encap:以太网  硬件地址 00:22:20:07:72:d6            UP BROADCAST MULTICAST  MTU:1500  跃点数:1          接收数据包:0 错误:0 丢弃:0 过载:0 帧数:0          发送数据包:0 错误:0 丢弃:0 过载:0 载波:0          碰撞:0 发送队列长度:1000           接收字节:0 (0.0 B)  发送字节:0 (0.0 B)          中断:27 基本地址:0x2000

lo        Link encap:本地环回            inet 地址:127.0.0.1  掩码:255.0.0.0          inet6 地址: ::1/128 Scope:Host          UP LOOPBACK RUNNING  MTU:16436  跃点数:1          接收数据包:12 错误:0 丢弃:0 过载:0 帧数:0          发送数据包:12 错误:0 丢弃:0 过载:0 载波:0          碰撞:0 发送队列长度:0           接收字节:720 (720.0 B)  发送字节:720 (720.0 B)

wlan0     Link encap:以太网  硬件地址 00:24:21:c9:af:7f            inet 地址:192.168.1.108  广播:192.168.1.255  掩码:255.255.255.0          inet6 地址: fe80::224:21ff:fec9:af7f/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  跃点数:1          接收数据包:5743 错误:0 丢弃:0 过载:0 帧数:0          发送数据包:5914 错误:0 丢弃:0 过载:0 载波:0          碰撞:0 发送队列长度:1000           接收字节:4741031 (4.7 MB)  发送字节:984245 (984.2 KB)          中断:16 Memory:f89f8000-f89f8100 并且,也找不到无线网卡的具体型号。

 

2。lspci,找到输出信息中,有关无线网卡的部分:

我的lspci -vv的结果:

02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8171 (rev 10)    Subsystem: Micro-Star International Co., Ltd. Device 6897    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-    Latency: 0, Cache Line Size: 64 bytes    Interrupt: pin A routed to IRQ 16    Region 0: I/O ports at 2000 [size=256]    Region 1: Memory at f8000000 (32-bit, non-prefetchable) [size=16K]    Capabilities: <access denied>    Kernel driver in use: rtl819xSE    Kernel modules: r8192se_pci

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)    Subsystem: Mitac Device 9223    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-    Latency: 0, Cache Line Size: 64 bytes    Interrupt: pin A routed to IRQ 27    Region 0: I/O ports at 3000 [size=256]    Region 2: Memory at f4000000 (64-bit, prefetchable) [size=4K]    Region 4: Memory at f2000000 (64-bit, prefetchable) [size=16K]    [virtual] Expansion ROM at f2010000 [disabled] [size=64K]    Capabilities: <access denied>    Kernel driver in use: r8169    Kernel modules: r8169里面只能输入类似于rtl819xSE的信息,即无线网卡的大概型号,而无法知道具体是哪个型号的,比如具体是RTL8192SE,还是RTL8188SU之类的。

 

3。用system-config-network查看:

搜了下,这个工具好像是Fedora Core带的网络管理工具,而Ubuntu没有的,我的是Ubuntu 10.04。。。

 

4.最后验证,用无线网卡的工具iwconfig,可以查看到自己的无线网卡的具体的型号:

【在Linux/Ubuntu下 如何查看自己的无线网卡的具体型号】

打开终端,输入iwconfig,显示出无线网卡的相关的信息:

crifan@crifan-laptop:~$ iwconfiglo        no wireless extensions.

eth0      no wireless extensions.

wlan0     802.11bgn  Nickname:”rtl8191SEVA2“          Mode:Managed  Frequency=2.412 GHz  Access Point: Not-Associated             Bit Rate:135 Mb/s             Retry:on   RTS thr:off   Fragment thr:off          Power Management:off          Link Quality=10/100  Signal level=0 dBm  Noise level=-100 dBm          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0          Tx excessive retries:0  Invalid misc:0   Missed beacon:0其中,rtl8191SEVA2即为我这里的无线网卡的具体的型号。

转载于:https://www.cnblogs.com/Dennis-mi/articles/5242467.html

相关资源:JAVA上百实例源码以及开源项目
最新回复(0)