(1)sudo apt-get install network-manager
(2)
将代码clone到本地 sudo git clone https://github.com/oblique/create_ap cd create_ap sudo make install 安装依赖的库 sudo apt-get install util-linux procps hostapd iproute2 iw haveged dnsmasq 打开热点（此时，树莓派wifi开着，但没有连wifi） sudo create_ap wlan0 eth0 热点名 密码 此时不出意外热点将会开启，但是会有warn，可以执行以下代码 sudo create_ap --no-virt wlan0 eth0 m热点名 热点 sudo create_ap --no-virt wlan0 eth0 chenredian 12345678以服务方式启动，执行开机自启 #1.修改服务配置,添加--no-virt参数 sudo nano /usr/lib/systemd/system/create_ap.service # 将 ExecStart=/usr/bin/create_ap --config /etc/create_ap.conf # 修改为 ExecStart=/usr/bin/create_ap --no-virt --config /etc/create_ap.conf #2.默认配置文件/etc/create_ap.conf,将下面两横改为自己的ssid和密码即可,修改自己的dhcp网关 sudo nano /etc/create_ap.conf # 将 GATEWAY=10.0.0.1 SSID=MyAccessPoint PASSPHRASE=12345678 # 修改为 GATEWAY=192.168.10.1 SID=chenredian PASSPHRASE=12345678 # 启动一个服务： systemctl start create_ap.service # 关闭一个服务： systemctl stop create_ap.service # 重启一个服务： systemctl restart create_ap.service # 显示一个服务的状态： systemctl status create_ap.service # 在开机时启用一个服务： systemctl enable create_ap.service # 在开机时禁用一个服务： systemctl disable create_ap.service # 查看服务是否开机启动： systemctl is-enabled create_ap.service
设置为开机启动
# 启动一个服务： systemctl start create_ap.service # 在开机时启用一个服务： systemctl enable create_ap.service关闭改服务
# 关闭一个服务： systemctl stop create_ap.service # 在开机时禁用一个服务： systemctl disable create_ap.service # 查看服务是否开机启动： systemctl is-enabled create_ap.service异常一：WARN: brmfmac driver doesn't work properly with virtual interfaces and it can cause kernel panic. For this reason we disallow virtual interfaces for your adapter.For more info: https://github.com/oblique/create_ap/issues/203 ERROR: Your adapter can not be a station (i.e. be connected) and an AP at the same time 处理：sudo nmcli dev dis wlan0 异常二:
sudo create_ap wlan0 eth0 my_raspi 88166908 WARN: brmfmac driver doesn't work properly with virtual interfaces and it can cause kernel panic. For this reason we disallow virtual interfaces for your adapter. For more info: https://github.com/oblique/create_ap/issues/203 WARN: Your adapter does not fully support AP virtual interface, enabling --no-virt Config dir: /tmp/create_ap.wlan0.conf.cDxIozig PID: 1132 Network Manager found, set wlan0 as unmanaged device... DONE/bin/create_ap: line 1669: dnsmasq: command not found
ERROR: Wrong version format!
处理: sudo yum install dnsmasq -y 异常三:sudo create_ap wlan0 eth0 my_raspi 12345678 WARN: brmfmac driver doesn't work properly with virtual interfaces andit can cause kernel panic. For this reason we disallow virtual interfaces for your adapter. For more info: https://github.com/oblique/create_ap/issues/203 WARN: Your adapter does not fully support AP virtual interface, enabling --no-virt Config dir: /tmp/create_ap.wlan0.conf.gC5KSqVQ PID: 2497 Sharing Internet using method: nat hostapd command-line interface: hostapd_cli -p /tmp/create_ap.wlan0.conf.gC5KSqVQ/hostapd_ctrl Configuration file: /tmp/create_ap.wlan0.conf.gC5KSqVQ/hostapd.conf
处理： sudo create_ap --no-virt wlan0 eth0 my_raspi 12345678
Failed to create interface mon.wlan0: -95 (Operation not supported)
