首先发现这个服务器的两个网口对应的交换机端口
ailixin-asw2960>en
ailixin-asw2960#terminal monitor
查看端口的状态
ailixin-asw2960#sho run int g0/10Building configuration...
Current configuration : 112 bytes!interface GigabitEthernet0/10 switchport access vlan 20 switchport mode access spanning-tree portfastend
然后进入特权模式，进入对应的端口
ailixin-asw2960#configure termina
ailixin-asw2960(config)#int rang g0/10,g0/11
查看交换机有几组绑定过
ailixin-asw2960(config-if)#do sh ip int b
ailixin-asw2960(config-if)#sh 关掉端口
GigabitEthernet0/49 unassigned YES unset down down GigabitEthernet0/50 unassigned YES unset down down Port-channel1 unassigned YES unset up up
ailixin-asw2960(config-if)#switchport mode trunk
ailixin-asw2960(config-if)#sh interfaces trunk （查看up状态的trunk 端口）
ailixin-asw2960(config-if)# channel-group 2 mode active
ailixin-asw2960(config-if)# channel-protocol lac
ailixin-asw2960(config-if)#no sh 开启端口
ailixin-asw2960(config-if)#exit
ailixin-asw2960(config)#do wr
转载于:https://www.cnblogs.com/tengfei520/p/5454403.html
相关资源：linux网卡启用trunk模式操作标准