SYSID 来指定当前system

今天用s.log遇到一个问题没办法显示log了，老提示off 这个log不能使用。

 

研究了一下，原因是我想看一下当前的system，于是想当然的sysid，结果发现没用，于是用sysid off,然后还是没用，再返回来就发现log这个地方悲剧了。

 

其实我真正想用的是sysname这个命令，可以显示当前的name，这样可以和userid一起显示

 

 

后来看了一下帮助，才知道sysid是有这个命令的，格式如下：

 

COMMAND INPUT ===>                                                                                                                              Purpose:  Specifies which of the system's logical                         SYSLOG data sets is displayed on the SYSLOG panel.                    You must be authorized to use this command.                                                                                             Where used:  Affects only the SYSLOG panel, but can be                    entered from any SDSF panel.                                                                                                            Format:  SYSID (system-id)                                                           (*)                                                                   (?)                                                                                                                          Example:  SYSID IPO1                                                      Causes the SYSLOG panel to display the SYSLOG for member IPO1.                                                                           For more information, select this topic by number:                        99 – Messages                                                

 

这个可以在ds的环境中看另外一个system的log，比如下面的sysid 就可以看到所有的system

COMMAND INPUT ===> SYSID S35                                  SCROLL ===> CSR JES SYSIDS=S30,S31,(S34),S35                                                

转载于:https://www.cnblogs.com/db2zos/archive/2013/04/18/3028324.html

相关资源：JAVA上百实例源码以及开源项目